Mains Block MD-06 EU/SP MK3 II

Mains Block MD-06 EU/SP MK3 II
Mains Block MD-06 EU/SP MK3 II
Mains Block MD-06 EU/SP MK3 II
Mains Block MD-06 EU/SP MK3 II

LoRad Shielded Mains Blocks in Aluminium
The mains blocks are fully shielded from radiated electric fields by means of their aluminium chassis. The conductive chassis drains the interference down to ground. It has to be connected to an earthed socket with an earthed mains cable, in order to work properly. For a useful degree of shielding and immunity, the mains block should be combined and employed with SUPRA LoRad shielded mains cables.

SUPRA NIF Transient Filter
All models are equipped with SUPRA NIF (Non-Intrusive Filtering), a mild transient filter which will not influence the transient properties of the equipment. SUPRA NIF is developed by Ben Duncan Research in England.

3-Way Surge Protection
The SP-models, i.e MD06-BS/SP, MD06-EU/SP and MD06-US/SP, are all equipped with SUPRA’s surge protection device which protects all three ways: Live to Earth, Neutral to Earth and Live to Neutral. Many other surge protectors are only Live to Neutral, and do not protect against field surges by proximate lightning. Lightning is always referred to earth.
For a correct and safe 3-way surge protection, the mains block has to be connected to an earthed wall socket.

MD06-EU/SP
6 EU sockets, Schuko.
Input connector: IEC-320
10 Amp Fuse
NIF transient filter
3-way Surge Protection.

For a correct and safe 3-way surge protection, the mains block has to be connected to an earthed wall socket.

75 000 Ft
db
db
Kedvencekhez
Ajánlom
Nyomtat
Összehasonlítás
Kérdés a termékről
Részletek
Adatok
Részletek

Technical data MD02-EU/SP to MD06-EU/SP

Standard European Standards, except UK, Ireland, Belgium and Italy
Maximal current 10 Ampere
Switch current capacity Optional 16A (high in-rush current capacity) Ampere
Nominal (maximal) voltage 230 (250) Volt
Maximal power load 2.3 kW
Mains frequency 50 Hz
Mains inlet socket International standard IEC-320 for 10 ampere
Internal cable area 2.5 mm2
Outlet sockets 2 to 6 (1 unfiltered, the rest NIF filtered, all of them SP protected) pieces
Fuse 10 Ampere
Filter (level) Non-Intrusive Filtering (up to 40) dB
Surge protection (SP) L to 0, L to Ground and 0 to Ground
Included accessories Brackets for wall mount and rubber feet as floor stands


Technical data MD0-EU/SP to MD15-16-EU/SP

Standard European Standards, except UK, Ireland, Belgium and Italy
Maximal current 16 Ampere
Nominal (maximal) voltage 230 (250) Volt
Maximal power load 3.6 kW
Mains frequency 50 Hz
Mains inlet socket International standard IEC-320 for 10 ampere
Internal cable area 2.5 mm2
Outlet sockets 8 to 15 (2 unfiltered and the rest NIF filtered, all of them SP protected) pieces
Filter (level) Non-Intrusive Filtering (up to 40) dB
Surge protection (SP) L to 0, L to Ground and 0 to Ground
Included accessories Brackets for wall mount and rubber feet as floor stands

Adatok
Webáruház készítés